Tacoma Replacement 3rd Brake Lens

I have quite a few smoked, clear, and red 3rd brake light lenses that have been modified to work with 1st and 2nd gens. NO dropping headliner. NO breaking the main seal people are so fearful of. And I include flush filler caps for the screw holes on the 1st gens.
Doesn’t fit any of our own third brake light designs. Technically it could, but it’s not recommended 🙃

These are all brand new and are hand-modified to fit the OEM brake light housing and will work with almost all aftermarket brake lights as well.

*No Light housing is included. This is only a LENS meant to be a direct replacement for your OEM or aftermarket LENS.

Installation:

-2nd gens have a simple replacement process – just remove the 2 screws in the OEM housing and put this lens in place of the old lens. Use a bead of silicone in the housing channel before placing lens. 5 minutes tops. No need for rubber plugs.

-1st gens will need a bead of silicone put in around the light housing channel to secure it. I didn’t want to put new holes in all of these lenses for our pre-existing screw holes in the housings as I didn’t think it would look clean having 4 holes total in the lens. The screw holes will have rubber plugs included.